[. . . ] Keep the instruction manual and the Product information safe for future reference or for the next owner. Damage caused by incorrect connection is not covered under the warranty. This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. [. . . ] Water hardness "Before using for the first time", Page 12 Switched off (tone remains for )1 Off during operation On during operation1 Not retrofitted (if shelf supports and a single set of pull-out rails are fitted)1 Retrofitted (if two or three sets of pull-out rails are fitted) Press the required basic setting and use the control The red bar next to the text field identifies the basic Use "Further settings" to scroll through the basic Change any of these settings. Note: Your changes to the basic settings will be retained even after a power failure. Discarding changes to the basic settings And use "Do not save" to confirm. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The availability of the Home Connect function depends on the availability of Home Connect services in your country. Follow the instructions in the Home Connect app to configure the settings. Notes ¡ Please note the safety precautions in this instruction Manual and make sure that they are also observed when operating the appliance via the Home Connect app. "Safety", Page 2 ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. The mobile device and the appliance are within range of your home network's Wi-Fi signal. You can adjust the settings and network settings for Home Connect by going to your appliance's basic settings. Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance is connected to your home network. If you disconnect the appliance from the network, all network information will be deleted. This setting initiates the connection between the Home Connect app and the appliance. When this function is deactivated, all you can do is view the appliance's operating status in the app. When this function is activated, you can remotely start and control the appliance. 3Operating the appliance with the Home Connect app When the Remote start function is activated, you can use the Home Connect app to remotely configure the appliance's settings and start it. The appliance must be connected to your home net- Work and to the Home Connect app. To configure the appliance's settings using the Home Connect app, "Remote control" must be Erating statuses are displayed in the Home Con- Notes ¡ If you open the appliance door within 15 minutes Of activating the Remote start function or of the set program ending, the Remote start function will be deactivated. When you start the oven using the controls on the appliance itself, the Remote start function is activated automatically. You can use the Home Connect app to adjust the settings or start a new program. Your appliance's software can be updated using the software update function, e. [. . . ] Ensure that air exchange is guaranteed in accordance with the diagram. Only fit appliances up to a height that allows accessories to be easily removed. Observe the installation dimensions and the installation instructions when installing in a corner. To ensure that the appliance door can be opened, you must take the minimum dimensions into consideration when installing in a corner. [. . . ]